Home About Services Catalog Projects Contacts +7 701 424 70 00
Рус / Eng / Қаз
KTZ Building
Home / Projects / KTZ Building
Administrative building · Astana

KTZ Building

Installation + service

8 elevators ·Fujitec ·Delivered: December 2019
Facility type
Administrative building
Year completed
December 2019
Elevators
8 elevators
Brand
Fujitec
Warranty
5 years on equipment and installation
[ 01 ] · About the project

Description
project

The KTZ Building is the tallest administrative building in Kazakhstan and home to the largest media facade in Central Asia. 34 floors of usable height plus a 17-meter steel spire-lightning rod.

The complex required a high-speed elevator group supporting intense passenger flow during morning and evening hours. Eight Fujitec Zexia passenger elevators were installed with group control and an intelligent call-allocation algorithm.

Technical challenges

The building's height required ±1 mm stopping accuracy even on the upper floors and active damping of horizontal sway from wind. Seismic resistance to magnitude 9 was also required.

Outcome

The elevators have served the building since 2019 without a single failure. Average wait time — 28 seconds at peak hours.

[ — ] · Details

Details
facility

Floors
34 floors · 175 m with spire
Area
110 000 m²
City
Astana
Address
г. Астана, ул. Динмухамеда Кунаева, 6
Client
АО НК «Қазақстан темір жолы»
General contractor
НК «КТЖ»
Architect
Kazakh architectural firms
Duration
11 months
Contract date
January 2019
[ 02 ] · Equipment

Installed
equipment

01
Fujitec Zexia
8 pcs
1,250 kg · 4.0 m/s · 34 floors · Gearless VVVF · Group of 8
[ 03 ] · Works

What we did

8 services
  • 01
    Elevator group design
  • 02
    Passenger-flow calculation
  • 03
    Equipment supply from the Fujitec factory
  • 04
    Supervised installation works
  • 05
    Commissioning works
  • 06
    Certification and commissioning
  • 07
    Technical staff training
  • 08
    24/7 service maintenance
[ 04 ] · Implementation stages

Project timeline

January 2019
Contract signing
Coordination of specifications and design
February 2019
Equipment order
Placing the order at the Fujitec factory, Japan
June 2019
Delivery
Supply of 8 equipment sets to the site
July 2019
Start of installation
Parallel installation of 8 elevators by 4 crews
November 2019
Commissioning
Testing, balancing, group setup
December 2019
Commissioning
Signing reports, start of service maintenance
[ 05 ] · Technical data

Specifications

Elevator model
Fujitec Zexia
Quantity
8 pcs
Load capacity
1,250 kg (16 passengers)
Speed
4.0 m/s
Travel height
120 m
Number of stops
34
Drive type
Gearless VVVF Fujitec MR-T
Group control
Yes, 8 elevators in a group
Seismic resistance
magnitude 9
Stopping accuracy
±1 mm
◆ DISCUSS YOUR FACILITY

We deliver a similar project

Passenger-flow calculation, equipment selection, turnkey installation and 5-year service.

Submit a request +7 701 424 70 00